Sunday, December 17, 2017
Eobdtool.com: Solution for MB Star C5 Xentry Connect Host Hard D...
Eobdtool.com: Solution for MB Star C5 Xentry Connect Host Hard D...: Experience of MB Star C5 Xentry Connect Host Hard Drive and Software HDD Issue Recently MB Star C5 DoIP Xentry Connect customers are attem...
Solution for MB Star C5 Xentry Connect Host Hard Drive and Software HDD Issue
Experience of MB Star C5 Xentry Connect Host Hard Drive and Software HDD Issue
Recently MB Star C5 DoIP Xentry Connect customers are attempt to remove hard drive on MB Star C5 Xentry Connect host by themselves and change data on computer, we sincerely warn our customers don’t do that.The MB Star Xentry Connect C5 is come with Star Diagnosis Xentry Connect C5 software inside, which support DOIP function same as original MB Star C5 Xentry connect. Below eobdtool.com share Solution for MB Star C5 Xentry Connect Host Hard Drive and Software HDD Issue.
What need pay attention to MB Star Diagnosis Xentry Connect Host Hard Driver?
The hard drive is used to reflash/update MB Star Xentry connect C5 firmware as well. Please don’t move the hard drive on SD Connect C5 host. Don’t connect the hard drive to computer to change data. You are at your risk. We are not hold the responsibility of your damage.
Eobdtool.com MB Star C5 Diagnosis Xentry Connect Host Hard Drive and Software HDD Issue Solution
You need to send back the hard drive to factory to run firmware upgrade. If the factory provides the firmware upgrade link or online resources, you don’t need to send it back.By the way, the movable external hard drive (software HDD) in the package contains Xentry Openshell XDOS, and engineering software Vediamo, DTS Monaco etc, it is the correct hard drive you can run on computer.
And don't insert the software HDD to C5 host to replace original hard drive. It will cause damage to the xentry connect c5 multiplexer.
Any need for Star Diagnosis SD Connect Compact C5 MB Star C5 Xentry Connect C5 Multiplexer just contact us freely.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
Wechat/WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Resource: http://sdconnect.hatenablog.com/entry/2017/12/18/163036
Wednesday, December 6, 2017
wiTECH Micropod 2 Work With DRBIII Emulation Instrcution
Making wiTECH Micropod 2 Work With DRBIII Emulation Instrcution
wiTECH Micropod 2 new generate Chrysler diagnostic tool, work with wiTECH Software for Chrysler, Jeep, Dodge & Fiat. Mopar wiTECH Micropod II online version work with TECHAuthority account for Chrysler online programming. Below eobdtool.com share instruction to make wiTECH Micropod 2 work with DRBIII emulation.
Eobdtool.com wiTECH Micropod 2 Test procedure:
Test 3 different wiTECH micropod 2 interfaces, 2 devices did not work with DRB III emulation at all, no matter which vehicle. The 3rd device worked and it worked on Chrysler Crossfire – access to ALL modules.I think the 2 devices which did not work are missing hardware for K-Line or some such.
The device verified working is an OFFLINE ONLY version of witech micropod 2, but I only use it for diagnostics, not for programming as I do not have a TechAuthority account. So if you need one for online use this is not the unit to buy.
Where to Purchase wiTech micropod 2 Offline Version:
http://www.eobdtool.com/witech-micropod-2-v170310-witech-2-chrysler-diagnostic-tool-mopar-micropod-ii-p-2411.html
How to get eobdtool.com witech to work with Enhanced DRB III Emulator:
1: Make a backup copy of the partition from the hard drive included with the micropod!
2: Install HDD in laptop
3: Set date to 01/01/17 BEFORE booting from laptop
4: Boot to HDD
5: Allow windows to install drivers, etc, as needed for your laptop and reboot as needed.
6: Once all of that is done, do NOT run WiTech yet!
7: Turn OFF internet!
8: Navigate to C:\ProgramData\wiTECH\jserver\data\core\stubs
9: Install DRB Emulator stub
10: Install DRB Enhanced emulator stub
11: Install K-Line stub
12: Reboot computer
13: ALLOW internet access
14: Run Flexnet software updater. Do NOT update WiTech!!!
15: Flexnet will find updates for enhanced DRB and K-Line
16: Install K-Line update first
17: Install Enhanced update next.
18: Once updates and downloaded and installed, turn OFF internet and NEVER turn on again!
19: Reboot computer
20: Attach Micropod to car. When green LED turns on, turn on car ignition
21: Attach USB cable to PC and witech Micropod 2
22: When Windows is done installing drivers, etc, you should show a network connection in the tool tray with no internet access
23: Run Wi-Tech
24: Press “Launch DRB III” button in lower right hand corner
25: Accept EULA
26: DRB Emulator will launch.
27: Enjoy.
Here is a Mega link to a backup image of working installation:
Link to HDD image/backup file of working OFFLINE WiTech installation with working DRB III Emulation:https://mega.nz/#!gYMC0axD!kicw9OQ9iAF5fK7JAJSUDUR-V5Ujj4DXzT6URGPL7iQ
HDD Partition backup made using Image for Linux from Terabyte Unlimited.
You can download trial version here:
https://www.terabyteunlimited.com/index.htm
Follow instructions to make bootable USB thumbdrive:
Copy image file to spare HDD and connect to laptop with USB adapter.
Boot laptop to USB thumbdrive
Follow prompts to restore backup to laptop HDD partition.
Any need for Chrysler wiTECH Micropod 2 Chrysler diagnostic tool Mopar Micropod II just contact us freely.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
Wechat/WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Tuesday, December 5, 2017
Super DSP3 Mileage Correction Tool Super DSP3 Odometer Correction Tool Replace DSP3+
Super DSP3 Mileage Correction Tool for Mercedes/Porsche/Audi/Vw Mileage Programming
Super DSP3 new released for Mileage Correction, Super DSP3 Mileage Correction Tool special for high-end car odometer correction, Super DSP3 Mileage Correction Tool cover mileage programming for Mercedes/Porsche/Audi/Vw/JLR/Volvo. Super Super DSP3 Mileage Correction Tool is first Mileage Correction Tool support 2017 car model.
Super DSP3 Mileage Correction Tool Super DSP3 Mileage programmer
Super DSP3 Mileage Programming Tool Features:
1. Super DSP3 Mileage correction tool work for Odometer correction via OBD adapter, NO need take off Dash Board from Car
2. Super DSP3 can replace DSP3+ for odometer correction, but do not support immo function now, will released future.
3. Super DSP3 Mileage Correction Tool Car Application: AUDI/VW/SKODA/SEAT/BENTLE/MERCEDES/LAND ROVER/ JAGUAR/ VOLVO/ PORSCHE (JLR Only cover till 2016)
4. Super DSP3 Mileage Correction Tool can not update online now
5.Super DSP3 Mileage Correction Tool is the most complete programming device for digital odometers, It is a high-quality embeded system, which offers a maximum of flexibility and working comfort.
For further questions about Super DSP3, digiprog 3, digimaster 3, Xtool X100 pad any Mileage Correction Tool for odometer correction, don't hesitate to contact us.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
Wechat/WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Subscribe to:
Posts (Atom)