Sunday, December 17, 2017
Eobdtool.com: Solution for MB Star C5 Xentry Connect Host Hard D...
Eobdtool.com: Solution for MB Star C5 Xentry Connect Host Hard D...: Experience of MB Star C5 Xentry Connect Host Hard Drive and Software HDD Issue Recently MB Star C5 DoIP Xentry Connect customers are attem...
Solution for MB Star C5 Xentry Connect Host Hard Drive and Software HDD Issue
Experience of MB Star C5 Xentry Connect Host Hard Drive and Software HDD Issue
Recently MB Star C5 DoIP Xentry Connect customers are attempt to remove hard drive on MB Star C5 Xentry Connect host by themselves and change data on computer, we sincerely warn our customers don’t do that.The MB Star Xentry Connect C5 is come with Star Diagnosis Xentry Connect C5 software inside, which support DOIP function same as original MB Star C5 Xentry connect. Below eobdtool.com share Solution for MB Star C5 Xentry Connect Host Hard Drive and Software HDD Issue.
What need pay attention to MB Star Diagnosis Xentry Connect Host Hard Driver?
The hard drive is used to reflash/update MB Star Xentry connect C5 firmware as well. Please don’t move the hard drive on SD Connect C5 host. Don’t connect the hard drive to computer to change data. You are at your risk. We are not hold the responsibility of your damage.
Eobdtool.com MB Star C5 Diagnosis Xentry Connect Host Hard Drive and Software HDD Issue Solution
You need to send back the hard drive to factory to run firmware upgrade. If the factory provides the firmware upgrade link or online resources, you don’t need to send it back.By the way, the movable external hard drive (software HDD) in the package contains Xentry Openshell XDOS, and engineering software Vediamo, DTS Monaco etc, it is the correct hard drive you can run on computer.
And don't insert the software HDD to C5 host to replace original hard drive. It will cause damage to the xentry connect c5 multiplexer.
Any need for Star Diagnosis SD Connect Compact C5 MB Star C5 Xentry Connect C5 Multiplexer just contact us freely.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
Wechat/WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Resource: http://sdconnect.hatenablog.com/entry/2017/12/18/163036
Wednesday, December 6, 2017
wiTECH Micropod 2 Work With DRBIII Emulation Instrcution
Making wiTECH Micropod 2 Work With DRBIII Emulation Instrcution
wiTECH Micropod 2 new generate Chrysler diagnostic tool, work with wiTECH Software for Chrysler, Jeep, Dodge & Fiat. Mopar wiTECH Micropod II online version work with TECHAuthority account for Chrysler online programming. Below eobdtool.com share instruction to make wiTECH Micropod 2 work with DRBIII emulation.
Eobdtool.com wiTECH Micropod 2 Test procedure:
Test 3 different wiTECH micropod 2 interfaces, 2 devices did not work with DRB III emulation at all, no matter which vehicle. The 3rd device worked and it worked on Chrysler Crossfire – access to ALL modules.I think the 2 devices which did not work are missing hardware for K-Line or some such.
The device verified working is an OFFLINE ONLY version of witech micropod 2, but I only use it for diagnostics, not for programming as I do not have a TechAuthority account. So if you need one for online use this is not the unit to buy.
Where to Purchase wiTech micropod 2 Offline Version:
http://www.eobdtool.com/witech-micropod-2-v170310-witech-2-chrysler-diagnostic-tool-mopar-micropod-ii-p-2411.html
How to get eobdtool.com witech to work with Enhanced DRB III Emulator:
1: Make a backup copy of the partition from the hard drive included with the micropod!
2: Install HDD in laptop
3: Set date to 01/01/17 BEFORE booting from laptop
4: Boot to HDD
5: Allow windows to install drivers, etc, as needed for your laptop and reboot as needed.
6: Once all of that is done, do NOT run WiTech yet!
7: Turn OFF internet!
8: Navigate to C:\ProgramData\wiTECH\jserver\data\core\stubs
9: Install DRB Emulator stub
10: Install DRB Enhanced emulator stub
11: Install K-Line stub
12: Reboot computer
13: ALLOW internet access
14: Run Flexnet software updater. Do NOT update WiTech!!!
15: Flexnet will find updates for enhanced DRB and K-Line
16: Install K-Line update first
17: Install Enhanced update next.
18: Once updates and downloaded and installed, turn OFF internet and NEVER turn on again!
19: Reboot computer
20: Attach Micropod to car. When green LED turns on, turn on car ignition
21: Attach USB cable to PC and witech Micropod 2
22: When Windows is done installing drivers, etc, you should show a network connection in the tool tray with no internet access
23: Run Wi-Tech
24: Press “Launch DRB III” button in lower right hand corner
25: Accept EULA
26: DRB Emulator will launch.
27: Enjoy.
Here is a Mega link to a backup image of working installation:
Link to HDD image/backup file of working OFFLINE WiTech installation with working DRB III Emulation:https://mega.nz/#!gYMC0axD!kicw9OQ9iAF5fK7JAJSUDUR-V5Ujj4DXzT6URGPL7iQ
HDD Partition backup made using Image for Linux from Terabyte Unlimited.
You can download trial version here:
https://www.terabyteunlimited.com/index.htm
Follow instructions to make bootable USB thumbdrive:
Copy image file to spare HDD and connect to laptop with USB adapter.
Boot laptop to USB thumbdrive
Follow prompts to restore backup to laptop HDD partition.
Any need for Chrysler wiTECH Micropod 2 Chrysler diagnostic tool Mopar Micropod II just contact us freely.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
Wechat/WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Tuesday, December 5, 2017
Super DSP3 Mileage Correction Tool Super DSP3 Odometer Correction Tool Replace DSP3+
Super DSP3 Mileage Correction Tool for Mercedes/Porsche/Audi/Vw Mileage Programming
Super DSP3 new released for Mileage Correction, Super DSP3 Mileage Correction Tool special for high-end car odometer correction, Super DSP3 Mileage Correction Tool cover mileage programming for Mercedes/Porsche/Audi/Vw/JLR/Volvo. Super Super DSP3 Mileage Correction Tool is first Mileage Correction Tool support 2017 car model.
Super DSP3 Mileage Correction Tool Super DSP3 Mileage programmer
Super DSP3 Mileage Programming Tool Features:
1. Super DSP3 Mileage correction tool work for Odometer correction via OBD adapter, NO need take off Dash Board from Car
2. Super DSP3 can replace DSP3+ for odometer correction, but do not support immo function now, will released future.
3. Super DSP3 Mileage Correction Tool Car Application: AUDI/VW/SKODA/SEAT/BENTLE/MERCEDES/LAND ROVER/ JAGUAR/ VOLVO/ PORSCHE (JLR Only cover till 2016)
4. Super DSP3 Mileage Correction Tool can not update online now
5.Super DSP3 Mileage Correction Tool is the most complete programming device for digital odometers, It is a high-quality embeded system, which offers a maximum of flexibility and working comfort.
For further questions about Super DSP3, digiprog 3, digimaster 3, Xtool X100 pad any Mileage Correction Tool for odometer correction, don't hesitate to contact us.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
Wechat/WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Tuesday, September 26, 2017
Can Clip Renault Diagnostic Tool FAQs
Can Clip Renault Diagnostic Tool With Clip Renault software FAQ
Can Clip Renault diagnostic tool dedicate to Renault diagnose & programming. Can Clip Renault work with Renault clip software, which have v171 new version released. Eobdtool.com have Can Clip Renault diagnostic tool with clip Renault software for sale. Below share customer Can clip Renault FAQs as following.
Eobdtool.com Can Clip Renault diagnostic interface FAQs:
Q1: Renault Clip for Renault from eobdtool.com all four indicator light flash, but when I enter the diagnosis menu, the CAN indicator light off and can’t establish connection, while the other three ones go on flashing. What should I do?
A1: there are two solutions: 1) try to install the software on a laptop (PC), no connection with power. 2) Try to diagnose K-line protocol car, if Eobdtool.com Renault Clip works, but can’t diagnose CAN BUS car, advice you return back to us for check.
Q2: How can I change English into French?
A2: When install the can clip renault software, you can select the French, but after you complete installation you cannot change the language. So, you have to uninstall the software and reinstall it, during installation, select language French.
Q3: I try to open Can Clip CD in several different computers, nothing in the CD.
A3: Check whether it has the carving trace at the back of CD, or if the CD Boot Sector is broken.
Q4: Connected to the car and four lights are lit Prompted for this content: 5800 window, units of measurement appear 104 Error 5800: Please check the power supply is connected, the normal connection indicator light red flashes. If Renault Clip from eobdtool.com is any problem of these two situations: reconnect, wait about 10 seconds before verification.
A4: Please follow the next two instructions to solve the problem:
1) The installed software can’t run in your computer system stably, there is no communication between the software and the device.
2). the computer USB interface does not work, try to use another one.
Q5: Does Renault Clip from eobdtool.com support analyze and test the status of Renault Megane II 2003 year up, and test the switch of electric windows?
A5: yes, Renault Can Clip can do it.
Q6: Can Renault Clip do my car NENAULT of 1995? Thanks.
A6: Yes, it can do Renault cars before 1996, but please tell me your car information in details, and then I can check for you!
Q7: I try to install the CAN clip software on different computers, but it always shows me this error reading “SPX CLIP Registration Client” as the following picture shows.
A7: Please follow our video or PDF instruction to correctly step-by-step install the software, and also install the software on the computer with XP operation system, better American English Professional version system.
Q8: Does Renault Can clip work with Renault Megage 2 Phase 2 2008-2010? Can it read out and set Wheel valve information? Can make key and support wiper blade?
A8: Renault CAN clip only support diagnosing, it can’t make key.
Q9: When I try to program with Renault CAN Clip, no communication, what’s the problem?
A9: Renault CAN Clip we supply only support diagnosis, not support programming.
Q10: What's the last version of Can Clip Renault software?
A10: Eobdtool.com have share Can Clip Renault Software V171 latest version download link on our website, just keep your order number to contact us if you need it.
More question about Renault Clip software Can Clip Renault diagnostic tool just feel free to contact us.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp/WeChat:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
You May Also Like:
Get Super Renault CAN Clip V145 with AN21355SC Chip from eobdtool
Saturday, September 23, 2017
2017.07 MB Star Xentry Mercedes Star Diagnose Using Guide
2017.07 MB Star Xentry Mercedes Star Diagnose Using Guide
MB Star Diagnose SD C4 software update 2017.09. Customer can order MB Star Diagnose SD C4 with Xentry software from eobdtool.com with Mercedes vediamo and DTS monaco as option. Below eobdtool.com share 2017.07 MB Star Diagnose Xentry Software change operating for open xentry diagnostic software following.
MB Star Diagnose SD C4 Software 2017.09 Xentry Mercedes Diagnostic Software
Vediamo работает, запускается, все прекрасно. Но после перезагрузки пропадает ключ xentry ! Надо постоянно новый ключ вставить - это плохо! Должна быть активным постоянно! ! !
Нет лицензии на дтс Монако, не включается. Я оставлю компьютер включенным, посмотрите пожалуйста в чем проблема.
Hello friend,
Our techncian just check that, your Xentry software work well, pls running it as following picture show.
And the Mercedes DTS monaco software form eobdtool.com can only open when connect to cars.
Any question about it just let me know freely.
Best Wishes
Emily
Focus on OBD Tool Since 2008
-------------------------------------------
Follow Us: www.facebook.com/eobdtool
Skype: eobdtool02
WhatsApp: (+86)13728823411
Email: sales01@eobdtool.com
Website: www.eobdtool.com
Wednesday, September 20, 2017
Toyota Diagnostic Software Tis Techstream V12.20.024 Free Download
Toyota Diagnostic Software Toyota Tis Techstream Software V12.20.024 Free Download
Toyota diagnostic Software V12.20.024 Toyota Techstream new released. Toyota diagnostic Software Tis Techstream V12.20.024 compatible with Mini VCI, Toyota Mongoose etc Toyota diagnostic tool. Eobdtool.com share Toyota Diagnostic Software Techstream V12.20.024 software free download as following.
Toyota Diagnostic Software Tis Techstream 12.20.024 crack Free Download:
https://mega.nz/#!9NBllR4R!v1hY8XHTcT-RBJfQypQ5zIDLypBDJ12LHy6zDqdNOFA
(This Toyota Diagnostic software is crack version. do not need activation)
Toyota Diagnostic Software Tis Techstream Software version: V12.20.024
Operation system: Windows 7 32 bit
More question about Toyota Diagnostic software Tis Techstream Software with Toyota Diagnostic tool just let me know freely.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Monday, September 18, 2017
CGDI MB Car Key Programmer CGDI Mercedes Auto Key Programmer Support Car List
CGDI MB Key Programmer CGDI Mercedes Benz Key Programmer Support Car List
CGDI MB Benz Key Prog is the new release Mercedes Benz car key programming tool. CGDI MB Auto Key Programmer for Mercedes Benz Key programming support all key lost, fastest Benz car key add and password calculation. Some customers need Mercedes benz CGDI Pro support car list. Here eobdtool.com sharing CGDI MB Key Programming Tool CGDI Benz key Programmer Mercedes Benz Auto Key Programmer CGDI MB Benz Key Pro.
MB CGDI Prog Mercedes Benz Car Key Prgrammer CGDI Mercedes Benz Programmer Supports All Keys Lost
Eobdtool.com Mercedes Benz CGDI Prog Auto Key Programmer Workable Benz car model:
Mercedes-Benz A series (2004 -)
Mercedes-Benz B series (2005-)
Mercedes-Benz C Series (2001 - , including 210)
Mercedes-Benz E Series (2001-, including 203)
Mercedes-Benz CL series (2001-)
Mercedes-Benz GLK (2004-)
Mercedes-Benz ML series (2003 -)
Mercedes-Benz R series (2003 -)
Mercedes-Benz G series (2003 -)
Mercedes-Benz S Series (2001 -, including 220)
Mercedes-Benz SLK (2003- )
Mercedes-Benz SLS (2004 -)
Mercedes-Benz Vito (2003-)
Mercedes-Benz Sprinter (2003 -)
Mercedes-Benz Vito (2003 -)
CGDI MB Prog CGDI Mercedes Benz Key Programmer from eobdtool.com Function:
Able to add keys on Mercedes Benz and program a new key when all keys are lost.
Add new Mercedes Benz keys: Data acquisition for 1 minute 50 seconds, pin code for 40 seconds and 99% success.
Program a new key to the following models when all keys are lost: 211, 209,204, 207, 212, 166,246,197,172,164+, 216 etc.
More detail about CGDI MB Programmer CGDI Mercedes benz key programming tool CGDI Benz car key programming just contact us freely.
Eobdtool.com have Star Diagnostic Connect Compact 5 original MB star C5 1:1 Clone MB SD C5 Multiplexer for Mercedes Benz Star Diagnosis & Programming, any interested, just check following.
Focus On OBD Tool Since 2008
——————————————
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Monday, September 4, 2017
New Genius Touch Map K-touch ECU Chiptuning Tool SD card not detected Solution
How to solved the New Genius Touch Map SD Card Not Detected Problem?
New Genius Touch Map whcih is update of Kess v2, K-touch ECU Chiptuning Tool work for ECU flashing & remapping better. But recently one customer from eobdtool.com meet New Genius Touch Map SD card not detected proble, here we share experience to solved the K-touch ECU Chiptuning Tool SD card not detected problem.
New Genius Touch Map K-touch hand held ECU Chiptuning Tool
New Genius Touch Map K-touch hand held ECU Chiptuning Tool
Hello eobdtool.com,
We got the New Genius Touch Map K-touch ECU Chiptuning Tool 5 month ago. Work well all the time, but today we got the error.
We got the New Genius Touch Map K-touch ECU Chiptuning Tool 5 month ago. Work well all the time, but today we got the error.
"SD card not detected!!
Insert the SD card and reset the hardware”
Pls help us. Waiting for your reply.
Regards,
Robert
Hello Robert,
Pls check solution as following:
Solution 1
Re-insert the SD card on Genius ecu tuning tool unit
(if this doesn't work, go to option 2)
Solution 2
Download TF repair program and then Reset sd card:
Step 1 Format TF card
Step 2 Run Win32DiskImage to write
Step 3 Connect to use.
For detailed of New Genius Touch Map K-touch ECU chiptuning tool, or need instruction on resetting New Genius Ktouch OBDB2 remap master TF card, please keep your tracking number to contact us freely.
For further questions about New Genius Touch Map don't hesitate to contact us.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
New Genius&Flash Point New Genius K-Touch MAP ECU Chip Tuning Tool Review
New Genius K-touch to Flash&Remap a ECU User Manual
Tuesday, August 29, 2017
VXDAS AM3011 OBD2 Scan Tool VS. Autel AL319
What's the different between VXDAS AM3011 & Autel AL319
VXDAS AM3011 obd2 scanner tool new released on eobdtool.com, which is competitive product of Autel AL319, VXDAS AM3011 support read and erase fault code, View freeze frame data, Retrieve vehicle information etc. Most customers may confused to buy VXDAS AM3011 or Autel AL319. Eobdtool.com share following comparison of VXDAS AM3011 and AL319 to help customer better to choose.
In terms of appearance:
Comparing by pictures:
VXDAS AM3011 has black color on the face of it.
Comparing by chart:
Autel AL319’s color is red.
2. VXDAS AM3011 has 3 feet long cable.
Autel AL319 only has 2.3 feet long.
3. VXDAS AM3011 has 2.4 inches screen size.
Autel AL319 has 2 inches screen size
4. VXDAS AM3011 has 5 keys to use.
Autel AL319 only has 3 keys to use.
5. VXDAS AM3011’s indicator light upon the screen.
Autel AL319 under the screen.
6. VXDAS AM3011’s connector has a LED light, which can find the obd2 socket on the car when we prepare to reading the code. (Like the pictures showed as below)
Autel AL319 has not this LED light.
In terms of product use experience:
Comparing by chart:.
1. VXDAS AM3011 spent 2 seconds to start-up
Autel AL319 use more than 5 seconds to open it;
2. VXDAS AM3011 spent 3 seconds to read all live data
Autel AL319 spent more than 10 seconds because VXDAS AM3011 has higher processor inside the product.
3. VXDAS AM3011 has EXIT key button to return to superior menu, that would save much of time.
Autel AL319 has not this button, every time when we want to return to superior menu we need to choose the down most option to perform it.
According to the information above, there is no doubt that AM3011 is better than AL319: AM3011 covers almost all of the advantages of AL319 and is superior to it. That's why I choose VXDAS AM3011 rather than AL319, how about you, which one you will choose?
For further questions about VXDAS AM3011 don't hesitate to contact us.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Wednesday, August 9, 2017
Released VCDS 17.8.0 Genuine Ross Tech HEX CAN Interface for VCDS 17.8.0 Download & Instruction
Released VCDS 17.8.0 VAG COM Software Work With Genuine Ross Tech VCDS 17.8.0 Hex CAN Interface Instruction
Free Download VCDS 17.8.0 Ross Tech VAG COM Cable 17.8 VCDS software:
https://www.linkedin.com/pulse/eobdtoolcom-vcds-1780-vag-com-178-software-free-download-emily-l
Download the self-installing VCDS 17.8.0 VAG COM Cable software available above.
Run it and follow the prompts to allow it to install itself.
The installer will prompt you if you wish to see a PDF of installation instructions. That PDF can be downloaded here.
You must install VCDS on your PC's hard disk!
- It may not work properly if you try running it directly from other media.
- However, you can use other media such as a CD or USB memory key to move the distribution file from a PC with internet access to another PC that does not have internet access.
Turn the car's ignition switch ON. No need to start the engine.
Start the VCDS 17.8 vag com cable software:
- Click [Options] and select the correct communications port.
- Use [Test] to confirm that the program can use the port and find the interface.
- Then [Save].
Query Fault Codes from some modules.
Please check frequently for updates! If you're using VCDS 17.8 on a PC that's on-line, it should tell you when there's an update available, but. if in doubt, check this page.
For further questions about VCDS 17.8 VAG COM Cable 17.8.0 don't hesitate to contact us.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Monday, August 7, 2017
How to update Digimaster 3 D3 Odometer Programmer Software?
How to update Digimaster III Odometer Programmer Software?
Eobdtool.com have latest version Digimaster 3 V1.8.1707.21 without token limited for sale, check below to order:
Digimaster 3 Mileage Correction Tool Digimaster III Odometer Correction Mater Without Token Limited
Eobdtool.com Digimaster 3 Mileage Correction Tool Profile:
Last Version: V1.8.1707.21
Support language: English
Token limited: without
Update: online update
What's Digimaster 3 V1.8.1707.21 New Update:
New added airbag resetting:
1.Luxgen 28556KM120
New add car models for odometer adjustment and airbag resetting models.
New added odometer adjustment:
1.American GM Buick Regal 24C32
2.American GM Buick LaCrosse 24C32
3.American GM Buick Verano 24C32
How to update digimaster 3 mileage correction tool to latest version?
Step 1. plug the power supply to digimaster3 and insert the network cable into the LAN interface of digimaster3.
Step 2. select “Management”
Step 3. select “Update”
Step 4. select “Software Upgrade”
Step 5. update in process
For further questions don't hesitate to contact us.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Wednesday, August 2, 2017
Ktag 7.020 K tag ECU chiptuning tool Ktag 7.020 Ktag Master ECU Remapping Tool
Ktag 7.020 Firmware K tag 2.23 Software Work Online No Token Limited
Ktag 7.020 with K suite 2.23 software ECU remapping tool new update on eobdtool.com. Ktag 7.020 Ktag Master firmware can work online. Ktag 7.020 K tag firmware with renew button no token limited. Eobdtool.com share Ktag 7.020 andKtag 7.020 Firmware Ktag Master ECU Programmer V2.23 Work Online
Eobdtool.com KTAG Master V7.020 K tag ECU Programming Tool:
Firmware version: V7.020 Software Version: 2.23
Update: By CD or Download link only. (I can give you a link to download newest version of ktag software)
Tokens:No tokens limitation
Online: Online Version,you can connect the internet when you use it
Functions: can do all the functions for KTM100 KTAG V7.003
Language:English French Portuguese Spanish Italian Deutsch
Operate system: system: XP (win7/8 need luck)
Support both Car, Motorcyle and Truck ECU Programming
New Add ECU Type: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766),
Mercedes-Benz 276ECU,Toyota 76F, and so on, at least 100 more ECU Types added
Support BDM Function Well, no checksum error, available Protocols BDM MOTOROLA MPC5xx
Add New File type (FENDT/JCB/VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN
Unlike Older verison Ktag Master ECU programming tools,V7.020 Ktag Master can connect the internet when use.Ktag Master V7.020 have no renee botton but have unlimited tokens.
For further questions about Ktag 7.020 Ktag Master don't hesitate to contact us
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Thursday, July 27, 2017
Chrysler MicroPod 2 wiTech V17.04.27 Software Installed Guide
wiTech MicroPod 2 V17.04.27 Software Installed Guide
wiTECH Micropod 2 Chrysler Micropod 2 with V17.04.27 wiTECH 2 software released. Chrysler Micrpod 2 with wiTECH V17.04.27 software cover Chrysler vehicles till 2017. Chrysler wiTECH Micropod 2 can replace Chrysler POD VCI as latest special diagnostic & programming tool for Chrysler Jeep Dodge.
Here eobdtool.com share how to install wiTech MicroPod 2 V17.04.27 on Windows 7 32 bit or 64 bit
1 Install AdobeAIRInstaller.exe
2 Install jre-6u45-windows-i586.exe
3 Install wiTECH_Install_17.04.27.exe
4 Restart the computer
Eobdtool.com WARNING for wiTECH MicroPod 2 Setup:
1 The computer on the day of the date
2 The computer must be connected to the Internet
3 Connect the machine to the device and open the Chrysler wiTECH software
MicroPod 2 clone is ready for use!
More detail about Chrysler pod vci wiTECH Micropod 2 Chrysler Jeep Dodge diagnostic tool just contact us freely.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Monday, July 17, 2017
2016.02 ASC Equipment Professional DPF Removal And EGR Delete Software User Manual
2016.02 ASC Equipment Professional DPF EGR Removal Software
ASC Equipment Professional DPF EGR REMOVER 3.0 software released. V2016.02 DPF Removal And Egr DPF Delete Software for modifying DPF FAP - EGR - FLAP-DTC. V3.0.0 DPF EGR Remover with Lambda Hotstart Flap O2 DTC 2 Full Software. Below Eobdtool.com sharing Professional DPF EGR REMOVER 3.0 software V2016.02 Egr DPF Removal Software Useing Guide.
2016.02 ASC Equipment Professional DPF EGR REMOVER 3.0 Software Full Pack Download
v3.0.0 DPF Removal And Egr Delete Software ABS DPF Egr Remover software 3.0 Download
Eobdtool.com Professional DPF EGR REMOVER 3.0 software V2016.02 DPF Removal And Egr Delete Software User Manual:
1. This eobdtool.com Professional DPF EGR REMOVER 3.0 software programs is easy to use, even for a beginner.Just need to select the right car and ECU.
2. Eobdtool.com DPF Removal And Egr Delete Software will be opening file load window and after loading file in programs, making all operations fast.
3. If you have selected the ECU item okay then the program will make make the solution automatically, and will be asked to you new file name for saving final FIXED copy.
4. After final copy, all eobdtool.com V2016.02 DPF Removal And Egr Delete Software operations will be done.
More detail about v2016.02 DPF Removal And Egr Delete Software just contact us freely.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Monday, July 10, 2017
2017.05 BMW Rheingold ISTA BWM DiagnosticSoftware Released
2017.05 Rheingold BMW ISTA Software Updated
V2017.5 BMW Rheigold software BMW diagnostic software released. 2017.05 BMW Rheingold software included BMW ISTA-D 4.05.20 software for BMW Diagnostics and BMW ISTA-P 3.61.4.002 for BMW programming. Eobdtool.com have 2017.5 rheigold BMW ISTA software for BMW diagnostics and programming till May 2017.
2017.05 Rheingold BMW ISTA Software Version:
ISTA-D: 4.05.20
ISTA-P: 3.61.4.002
VIN: 20170425
2017.5 BMW Rheingold Softwares:
ISTA/D 4.05.20
ISTA/P 3.61.4.002
VIN: 20170425
ETK 2017.05
KSD 2017.04
INPA
NCS
winkfp
e-sysplus 3.27.1
tool32 61.2.002
FSC
BMWAi
2017.5 Rheigold BMW Software Display:
Eobdtool.com have BMW ICOM NEXT A, BMW ICOM A2 with rheingold BMW ISTA software for sale, any question about bmw diagnostic just contact Skype: eobdtool02 freely.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Friday, July 7, 2017
MPPS V21 Lastest MPPS Software V21 ECU Chip Tuning Cable
MPPS V21 ECU chiptuning tool released, MPPS V21 Interface with MPPS V12 software is update version of MPPS V18. MPPS V21 add new model based on MPPS V18 software for OBD and Tricore. Eobdtool.com share MPPS V21 customer review as following.
– The cable is a nice quality OBD male cable, it looks like many ones, but it’s a true EU Clone MPPS V21 fully open (Tricore, MultiBoot, OBD). Tricore cable adaptor looks like many ones too, but very well made!
– Of course I did but he neglected to listed like everyone else, so were sending him a new cable like people who had the issue before it was determined. Anyways everyone who had there cable burned we replaced and there using MPPS v18 with no issues. MPPS v21 was NO big update, it was just a timebomb and released solely for the purpose of killing clones
– The tool was initially sold as MPPS v18, before we knew about the timebomb amt put inside of MPPS v21 we had told users they could update, our mistake. Although every user who had issue with a dead cable was sent a free cable replacement overnight to them via fedex. No one was left in the dark and everyone was contacted and post was made telling everyone about the timebomb and to not use MPPS v21, only MPPS v18. This thread should be closed as the problem has been resolved for all parties involved.
– I also received a replacement cable. Now it works ok with latest v18 version.
But i did not receive any notification, not to use it with eobdtool.com mpps v21.
Actually it was sold with a privillage of being able to work with mpps v21.
Also, not true about no differences with mpps v21.
mpps v18 doesn’t support EDC17C64, which is the main reason i purchased the tool in the first place.
So now i am hoping you will remove the timebomd from the v21 and receive the update in the next few months.
But i did not receive any notification, not to use it with eobdtool.com mpps v21.
Actually it was sold with a privillage of being able to work with mpps v21.
Also, not true about no differences with mpps v21.
mpps v18 doesn’t support EDC17C64, which is the main reason i purchased the tool in the first place.
So now i am hoping you will remove the timebomd from the v21 and receive the update in the next few months.
More detail about MPPS V21 ECU Chiptuning tool update version of MPPS V18 just contact us freely.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Friday, June 30, 2017
Star Diagnosis Compact4 Xentry Timeout Eror and not Starting Issues Solution?
How to fix Star Diagnosis Compact4 DAS Xentry Timeout Error and Not Starting Issues?
Star Diagnosis Compact4 is popular Mercedes Star Diagnostic tool, Star Diagnosis Compact4 work with 052017 DAS Xentry star diagnostic software. Old Version Star Diagnosis Compact4 xentry software have appeared Timeout Error and not starting issue. Eobdtool.com share Star Diagnosis Compact4 solution for old version issue.
Problem may Caused by:
Too much to modify, the date is checked more than once during start up.
Xentry 12/2015 and 03/2016 have a date lock on them to prevent them opening after 09/09/2016.
How to fix the Xentry timeout error as of 12/15:
1. Free download EobdTool.com XentryTimeout.rar and unzip：
https://mega.nz/#!RgczBKLa!NUXoAM4Gbu34VXAw83MdswtujhSGnmUoroazFUbJFGE
(This fix automatically sets the date back, launches the program, then returns the correct date so the program can be run correctly. It also has a check to prevent it launching twice (which will trap the date at and incorrect setting) . It will also run just fine with the xp star shell in place.)
2. Copy start_Xentry.exe to the Xentry bin folder
3. Overwrite or rename the existing file
Kindly Note:
1.this is version3, remodded to overcome asam3 error and add Xentry sim functionality
2.in the windows control panel make sure short date format in “region and language” is set to dd/mm/yyyy or mm/dd/yyyy
3. If your OLD DAS XENTRY do not fix by this way, you'd better order a lastest eobdtool.com Star Diagnosis Xentry Das Software.
This solution changes the system date automatically, Windows defender or other security programs may mistake it for a virus. Do not worry, it is perfectly safe and benign, and will not harm your PC. Just add it to the exceptions list in your antivirus program.
Focus On OBD Tool Since 2008
Follow Us:www.facebook.com/eobdtool
Skype:eobdtool02
WhatsApp:(+86)13728823411
Email:sales01@eobdtool.com
Website:www.eobdtool.com
Subscribe to:
Posts (Atom)